TWO-TONE DENIM JEANS
Ingredients:
-1 pair of medium-wash jeans
-1 pair of light-wash jeans
-Scissors
-Fabric Glue
Directions:
1. Measure out and mark up two rectangular panels on the light-wash jeans. Make sure these panels are equally wide—about 6" x 11"—then cut them out using fabric scissors.
2. Place the darker jeans on a flat surface and determine/mark where you want the patches to go.
3. Apply a generous amount of fabric glue to the backside of the light-wash panels. Be sure to evenly distribute the glue on the fabric.
4. Position the light-wash patches over the knee area on the dark-wash jeans and press firmly.
5. Make sure the pieces are completely dried and adhered before you pick them up.
6. Wait 72 hours before washing them—and remember to turn the jeans inside out first!
No comments:
Post a Comment